20-Port Gigabit Web Smart Ultra PoE Switch
- 8 x Gigabit UPoE ports
- 8 x Gigabit PoE+ ports
- 4 x Shared Gigabit ports (RJ-45 or SFP)
- Supports PoE (15.4W), PoE+ (30W), and UPoE (60W) power
- 370W PoE power budget
- Easy-to-use web-based management interface
- Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
- Bandwidth control per port
- Private and Voice VLAN support
- Smart Fan
- 40Gbps switching capacity
- IEEE 802.1p QoS with queue scheduling support
| Specifications | |
| Standards | IEEE 802.1d |
| IEEE 802.1p | |
| IEEE 802.1Q | |
| IEEE 802.1s | |
| IEEE 802.1w | |
| IEEE 802.1X | |
| IEEE 802.1ab | |
| IEEE 802.3 | |
| IEEE 802.3u | |
| IEEE 802.3x | |
| IEEE 802.3z | |
| IEEE 802.3ab | |
| IEEE 802.3ad | |
| IEEE 802.3af | |
| IEEE 802.3at | |
| IEEE 802.3az | |
| IEEE 802.3bt (draft) | |
| Device Interface | 8 x Gigabit Ultra PoE ports |
| 8 x Gigabit PoE+ ports | |
| 4 x Gigabit shared ports (RJ-45 or SFP) | |
| LED indicators | |
| LED Display mode button (toggles LED indicators to display link/activity or PoE only port status) | |
| Data Transfer Rate | Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) | |
| Gigabit Ethernet: 2000Mbps (full duplex) | |
| Performance | Switch fabric: 40Gbps |
| RAM buffer: 512KB | |
| MAC Address Table: 8K entries | |
| Jumbo Frames: 10KB | |
| HOL Blocking Prevention | |
| Forwarding rate: 29.8Mpps (64-byte packet size) | |
| Management | HTTP/HTTPS (SSL v2/3 TLS) web-based GUI |
| SNMP v1, v2c, v3 | |
| RMON v1 | |
| Static Unicast MAC address | |
| Enable/disable 802.3az power saving | |
| LLDP and LLDP-MED | |
| Virtual cable diagnostics test | |
| IPv6: IPv6 neighbor discovery, IPv6 Static IP, DHCPv6, auto configuration | |
| MIB | IP FORWARD TABLE MIB RFC 1354 |
| RMON MIB RFC 1271 | |
| IPV4 MIB RFC 1213 | |
| IPV6 MIB RFC 2465 | |
| GVRP MIB IEEE 802.1Q-VLAN | |
| LA MIB IEEE 802.3ad | |
| LLDP MIB IEEE 802.1AB | |
| IGMP SNOOPING MIB RFC 2933 | |
| MLD SNOOPING MIB RFC 3019 | |
| PRIVATE VLAN MIB IEEE 802.1Q | |
| DHCPSNOOP MIB RFC 2026 | |
| QOS MIB RFC 4323 | |
| SNMP MIB RFC 3415 | |
| STP MIB RFC 4318 | |
| PNAC MIB IEEE 802.1x | |
| VLAN MIB IEEE 802.1q | |
| DNS MIB RFC 1611 | |
| ACL MIB | |
| BANDWIDTH CTRL MIB | |
| LBD MIB | |
| MIRROR MIB | |
| IPV6 NEIGHBOR MIB | SNTP MIB |
| STORM CTRL MIB | |
| STATISTICS MIB | |
| TOOL MIB | |
| VOICE VLAN MIB | |
| DOS MIB | |
| Spanning Tree | IEEE 802.1d STP (Spanning Tree protocol) |
| IEEE 802.1w RSTP (Rapid Spanning Tree protocol) | |
| IEEE 802.1s MSTP (Multiple Spanning Tree protocol) | |
| Link Aggregation | 802.3ad Dynamic LACP |
| Static Link Aggregation | |
| Quality of Service (QoS) | 802.1p Class of Service (CoS) |
| DSCP (Differentiated Services Code Point) | |
| Bandwidth control per port | |
| Queue Scheduling: strict priority, weighted round robin (WRR) | |
| VLAN | Multiple management VLAN assignment |
| Asymmetric VLAN | |
| 802.1Q Tagged VLAN | |
| GVRP | |
| Up to 256 VLAN groups, ID Range 1-4094 | |
| Private VLAN (Protected Ports) | |
| Voice VLAN (10 user defined OUIs) | |
| Multicast | IGMP Snooping v1, v2, v3 |
| Static Multicast Address | |
| Up to 256 multicast entries | |
| Port Mirror | Rx, Tx, or Both |
| One to one, many to one | |
| Encryption | 802.1X Port-Based Network Access Control , RADIUS, TACACS+ |
| Local Dial-in User Authentication | |
| DHCP Snooping | |
| Loopback Detection | |
| Duplicated Address Detection | |
| Trusted Host | |
| Denial of Service (DoS) | |
| ACL IPv4 L2-L4 & IPv6 | MAC Address |
| VLAN ID | |
| Ether Type (IPv4 only) | |
| IP Protocol 0-255 | |
| TCP/UDP Port 1-65535 | |
| 802.1p | |
| DSCP (IPv4 only) | |
| IPv6 Address (IPv6 only) | |
| Compatibility | Optional Software Utility: Windows® 10, 8.1, 8, 7, and Windows® Server 2003/2008/2012/2016 |
| Power | Input: 100 – 240V AC, 50/60Hz, internal power supply |
| Max. consumption: 25.2W (No PoE load) | |
| PoE | PoE budget: 370W |
| 802.3at: up to 30W per port (ports 1-8) | |
| 802.3bt: up to 60W per port (ports 9-16) | |
| Mode A: Pins 1,2 for power+ and pins 3,6 for power – (mode A) | |
| PD auto/manual classification | |
| PoE port priority | |
| PoE power scheduling | |
| Over current/short circuit protection | |
| Fan/Acoustics | Quantity: 2 |
| Max Noise Level: 52.8 dBA | |
| MTBF | 279,589 hours |
| Operating Temperature | -5° – 50°C (23° – 122°F) |
| Operating Humidity | Max. 95% non-condensing |
| Dimensions | 440 x 250 x 44mm (17.3 x 9.8 x 1.74 in.) |
| Rack mountable 1U height | |
| Weight | 3.86kg (8.49 lbs.) |
| Certifications | CE |
| FCC | |
| UL | |