| Specifications |
| Standards |
IEEE 802.3 |
| IEEE 802.3u |
| IEEE 802.3ab |
| IEEE 802.3x |
| IEEE 802.3p |
| IEEE 802.3af |
| IEEE 802.3at |
| IEEE 802.3az |
| Device Interface |
8 x Gigabit PoE+ ports |
| LED indicators |
| DIP switch |
| Data Transfer Rate |
Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) |
| Gigabit Ethernet: 2000Mbps (full duplex) |
| Performance |
Switch Fabric: 16Gbps |
| RAM Buffer: 192KB |
| MAC Address Table: 4K entries |
| Jumbo Frames: 9KB |
| Forwarding rate: 11.9Mpps (64-byte packet size) |
| Special Features |
Long range PoE+ up to 200m at 10Mbps |
| VLAN port isolation |
| 802.1p Class of Service (CoS) |
| Wall mountable |
| DIP Switch |
| Switch |
Status |
Function |
| 1 |
OFF |
Ports 1 & 2: Default gigabit PoE+ |
| ON |
Ports 1 & 2: Long range PoE+ up to 200m at 10Mbps |
| 2 |
OFF |
Ports 3 & 4: Default gigabit PoE+ |
| ON |
Ports 3 & 4: Long range PoE+ up to 200m at 10Mbps |
| 3 |
OFF |
VLAN port isolation disabled |
| ON |
VLAN port isolation on ports 1-4 |
| 4 |
OFF |
QoS disabled |
| ON |
QoS Enabled: Video & Voice – High Priority |
| 5 |
OFF |
Port 5: Default gigabit PoE+ |
| ON |
Port 5: Long range PoE+ up to 200m at 10Mbps |
| 6 |
OFF |
Port 6: Default gigabit PoE+ |
| ON |
Port 6: Long range PoE+ up to 200m at 10Mbps |
| 7 |
OFF |
Port 7: Default gigabit PoE+ |
| ON |
Port 7: Long range PoE+ up to 200m at 10Mbps |
| 8 |
OFF |
VLAN port isolation disabled |
| ON |
VLAN port isolation on ports 5-7 |
|
| *DIP Switch 3 & 8 cannot be enabled at the same time |
| Power |
Input: 100 – 240 V AC, 50/60Hz, 2.5A |
| Output: 55V DC, 1.3A external power adapter |
| Max. consumption: 70.6W |
| PoE |
PoE budget: 65 Watts |
| PoE Mode A: Pins 1,2 for power and pins 3,6 for power |
| Operating Temperature |
0° – 40 °C (32° – 104 °F) |
| Operating Humidity |
Max. 90% non-condensing |
| Dimensions |
240 x 105 x 27mm (9.45 x 4.13 x 1.1 in.) |
| Weight |
592g (20.9 oz.) |
| Certifications |
CE |
| FCC |
