TRENDnet TI-G162
TRENDnet TI-G162
Back to products
TRENDnet TI-G102i
TRENDnet TI-G102i
Κλικ για μεγέθυνση

TRENDnet TI-G642i

Κωδικός προϊόντος: TI-G642i

6-Port Industrial Gigabit L2 Managed DIN-Rail Switch

TRENDnet

15 ΗΜΕΡΕΣ

Datasheet

Περιγραφή

6-Port Industrial Gigabit L2 Managed DIN-Rail Switch

TRENDnet’s Industrial Gigabit L2 Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today’s SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance fiber networking applications.

  • 4 x Gigabit ports
  • 2 x SFP slots
  • Supports 100/1000Base-FX fiber SFP modules
  • 12Gbps switching capacity
  • Hardened IP30 rated metal housing
  • Includes DIN-rail mounting bracket
  • Operating temperature range of -40° – 75° C (-40° – 167° F)
  • Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
  • IEEE 802.1p QoS with queue scheduling support
  • Bandwidth control per port
  • Dual redundant power inputs with overload current protection
  • Alarm output triggered by power failure
  • Supports Ethernet Ring Protection Switching (ERPSv2)
  • Power supply sold separately (model: TI-M6024)
Specifications 
Standards             IEEE 802.1d
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1w
IEEE 802.1X
IEEE 802.1ab
IEEE 802.1ax
IEEE 802.3u
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3ad
IEEE 802.3az
Device Interface      4 x Gigabit ports
2 x 100/1000Mbps SFP slots
6-pin removable terminal block (primary/RPS power inputs & alarm relay output)
DIP switches
LED indicators
Reset button
Data Transfer Rate   Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit Ethernet: 2000Mbps (full duplex)
Performance      Switch fabric: 12Gbps
RAM buffer: 128MB
MAC address table: 8K entries
Jumbo frames: 10KB
Forwarding mode: store and forward
Forwarding rate: 18.9Mpps (64-byte packet size)
Management                        HTTP web-based GUI
CLI: Telnet / SSHv2
SNMP v1, v2c, v3
SNMP trap (up to 5 receivers)
RMON groups 1/2/3/9
Device configuration backup & restore, upgrade firmware, reboot, and reset to default
Multiple administrative or read-only user accounts
Enable or disable power saving mode per port
Static MAC entries
LLDP (Link layer discovery protocol)
Netlite device map
ONVIF device discovery
SNTP
SMTP alert
Syslog
Port statistics/utilization
Traffic monitor
Port mirror: one to one, many to one
Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)
Loopback detection
DHCP relay/option 82
Modbus/TCP
SFP DDMI (Digital Diagnostic Monitoring Interface)
ERPS (Ethernet Ring Protection Switching) G8032v2
MIB   MIB II RFC 1213
Bridge MIB RFC 1493
RMON (Group 1,2,3,9) RFC 2819 RFC 1757
Spanning Tree   IEEE 802.1d STP (spanning tree protocol)
IEEE 802.1w RSTP (rapid spanning tree protocol)
BPDU filter, guard, and root guard
Link Aggregation Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups)
Quality of Service (QoS)    802.1p Class of service (CoS)
DSCP (Differentiated Services Code Point)
Bandwidth control per port
Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)
VLAN    802.1Q tagged VLAN
MAC-based VLAN
Port isolation
Up to 256 VLAN groups, ID range 1-4094
Multicast     IGMP snooping v1, v2, v3
IGMP querier
IGMP fast leave
Up to 256 multicast groups
Static multicast entries
Access Control     802.1X authentication (Local user database, RADIUS, guest VLAN assignment)
DHCP snooping/screening
Trusted host/IP access list for management access
Port Security/MAC address learning restriction (Up to 100 entries per port)
Static/dynamic ARP inspection
ACL      Source/Destination MAC address
Source/Destination IP address
Source Interface
VLAN ID
EtherType
TCP/UDP port 1-65535
Special Features       Netlite device discovery and map display in GUI
Port security: MAC address learning restriction per port
DHCP relay/option 82 & DHCP server snooping/screening support
Wide operating temperature range
Dual redundant power inputs
Alarm relay triggered by power failure
Surge and ESD protection
Power    PWR (Primary) terminal input: 20 – 60V DC
RPS (Redundant) terminal input: 20 – 60V DC
Compatible power supply: TI-M6024 (60W), TI-S12024 (120W), TI-S12048 (120W), and TI-S24048 (240W) sold separately
Max. consumption: 12W
Terminal Block     Redundant power inputs, alarm relay contact, 6 pin
Wire range: 0.5 mm^2 to 2.5 mm^2
Solid wire (AWG): 12-26
Stranded wire (AWG): 12-26
Wire strip length: 10-11mm
DIP Switch
Switch Status Function
1 OFF Disable alarm relay for PWR power input
ON Enable alarm relay for power failure on PWR power input
2 OFF Disable alarm relay for RPS power input
ON Enable alarm relay for power failure on RPS power input
Alarm Relay Output   Relay output with current carrying capacity of 1A, 24V DC
Short circuit mode when one power source is connected
Open circuit mode when two power sources are connected
Enclosure      IP30 rated metal enclosure
Fanless passive cooling
DIN-Rail mount
Grounding point
ESD (Ethernet) Protection: 8KV DC
Surge (Power) Protection: 2KV DC
MTBF  996,299 hours @ 25° C
125,932 hours @ 75° C
Operating Temperature -40° – 75° C (-40° – 167° F)
Operating Humidity Max. 95% non-condensing
Dimensions 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)
Weight 720g (1.59 lbs.)
Certifications     CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)