5-Port Industrial Gigabit PoE+ Wall-Mounted Front Access Switch
TRENDnet’s Industrial Gigabit PoE+ Wall-Mounted Front Access Switch Series are well suited for IP surveillance, IoT, and automation networks for homes and businesses. These hardened industrial gigabit flat switches provide front access to ports and power interfaces for easier installation. The flat and compact size make them ideal for cabinet installations where space is limited. Each hardened industrial front access switch features gigabit PoE+ ports for connecting devices such as wireless access points, IP cameras, and IoT appliances. These hardened front access switches come equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments.
- 4 x Gigabit PoE+ ports
- 1 x Gigabit port
- 120W PoE power budget
- 10Gbps switching capacity
- Supports jumbo frames up to 9KB
- Hardened IP30 rated metal housing
- Includes DIN-Rail bracket and magnetic wall mount kit
- Operating temperature range of -40° – 75° C (-40° – 167° F)
- Redundant power inputs with overload current protection
- Alarm relay triggered by power failure
- Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
| Specifications | |
| Standards | IEEE 802.3 |
| IEEE 802.3u | |
| IEEE 802.3ab | |
| IEEE 802.3x | |
| IEEE 802.3af | |
| IEEE 802.3at | |
| Device Interface | 4 x Gigabit PoE+ ports |
| 1 x Gigabit port | |
| 6-pin removable terminal block | |
| LED indicators | |
| DIN-Rail mount | |
| Wall mount | |
| Grounding point | |
| Data Transfer Rate | Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) | |
| Gigabit: 2000Mbps (full duplex) | |
| Performance | Data RAM Buffer: 1024KB |
| Switching Fabric: 10Gbps | |
| MAC Address Table: 2K entries | |
| Jumbo Frame: 9KB | |
| Forwarding rate: 7.44Mpps (64-byte packet size) | |
| Special Features | Hardened components rated for extreme temperatures |
| Dual redundant power inputs | |
| Auto-Negotiation | |
| Auto store and forward architecture | |
| Automatic address learning and address aging | |
| ESD 8KV support | |
| DC Power | Input: 48 – 56V DC |
| Compatible power supply: TI-S24048 (sold separately) | |
| Max. consumption: 5W (no PoE) | |
| AC Power | Input: 100 – 240V AC, 50/60Hz, 2A |
| Compatible power adapter: 48VDC3000 (sold separately) | |
| Output: 48V DC, 3.34A 160W max. | |
| PoE | PoE budget: 120W @56V DC |
| Terminal Block | Redundant power inputs, alarm relay contact, 6 pin |
| Wire range: 0.34mm^2 to 2.5mm^2 | |
| Solid wire (AWG): 12-24/14-22 | |
| Stranded wire (AWG): 12-24/14-22 | |
| Torque: 5 lb. – In / 0.5Nm / 0.56 Nm | |
| Wire strip length: 7-8mm | |
| Alarm Relay Contact | Relay outputs with current carrying capacity of 1A, 24V DC |
| Open circuit mode when two power sources are connected | |
| Short circuit mode when only one power source is connected | |
| MTBF | 454,556 hours |
| Housing | IP30 metal case |
| DIN-Rail mount | |
| Wall mount | |
| Magnet mount | |
| Grounding point | |
| Operating Temperature | -40° – 75° C (-40° – 167° F) |
| Operating Humidity | Max. 95 % non-condensing |
| Dimensions | 120 x 145 x 25mm (4.7 x 5.7 x 1 in.) |
| Weight | 510g (1.2 lb.) |
| Certifications | CE |
| FCC | |
| UL | |
| Shock (IEC 60068-2-27) | |
| Freefall (IEC 60068-2-32) | |
| Vibration (IEC 60068-2-6) | |