TRENDnet TI-PE80
Κατεβάστε το αρχείο
8-Port Industrial Fast Ethernet PoE+ DIN-Rail Switch
TRENDnet's Industrial Fast Ethernet PoE+ DIN-Rail Switches feature a rugged IP30 rated metal enclosure. These industrial unmanaged PoE+ switches are designed to withstand a high degree of vibration and shock, while operating in both high and low temperatures for industrial environments within -40° – 75° C (-40° – 167° F). Redundant power inputs with overload current protection on each industrial unmanaged PoE+ switch minimizes network downtime.Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Industrial Fast Ethernet Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. With PoE technology, users only need one set of cables to deliver both data and power from the industrial unmanaged PoE+ switch. With these industrial unmanaged PoE+ switches, easily network PoE devices such as high-power wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV decoders, access controls, and more.
- 8 x Fast Ethernet PoE+ ports
- 200W PoE power budget
- 1.6Gbps switching capacity
- Hardened IP30 rated metal switch
- Includes DIN-Rail mount and wall mount brackets
- Wide operating temperature range of -40° – 75° C (-40° – 167° F)
- Dual inputs provide redundant power with overload current protection
- Alarm relay triggered by power failure
- Power supply sold separately (model: TI-S24048)
| Specifications | |
| Standards | IEEE 802.3 |
| IEEE 802.3u | |
| IEEE 802.3ab | |
| IEEE 802.3x | |
| IEEE 802.3af | |
| IEEE 802.3at | |
| Device Interface | 8 x Fast Ethernet PoE+ ports |
| 6-pin removable terminal block | |
| LED indicators | |
| DIN-Rail mount | |
| Wall mount | |
| Grounding point | |
| Data Transfer Rate | Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) | |
| Performance | Data RAM Buffer: 1MB |
| Switching Fabric: 1.6Gbps | |
| MAC Address Table: 1K entries | |
| Forwarding rate: 1.19Mpps (64-byte packet size) | |
| Special Features | Hardened components rated for extreme temperatures |
| Dual redundant power inputs | |
| ESD 8KV support | |
| Low-profile design | |
| DC Power | Input: 48 – 56V DC |
| Recommended power supply: TI-S24048 (sold separately) | |
| Max. consumption: 5.76W (no PoE) | |
| PoE | |
| PoE budget: 200W | |
| Terminal Block | Redundant power inputs, alarm relay contact, 6 pin |
| Wire range: 0.34mm^2 to 2.5mm^2 | |
| Solid wire (AWG): 12-24/14-22 | |
| Stranded wire (AWG): 12-24/14-22 | |
| Torque: 5 lb. – In / 0.5Nm / 0.56Nm | |
| Wire strip length: 7-8mm | |
| Alarm Relay Contact | |
| Relay outputs with current carrying capacity of 1A, 24V DC | |
| Open circuit mode when two power sources are connected | |
| Short circuit mode when only one power source is connected | |
| MTBF | 510,304 hours |
| Housing | IP30 metal case |
| DIN-Rail mount | |
| Wall mount | |
| Grounding point | |