Description
TRENDnet’s 12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch, model TI-PG1284i, has eight Gigabit PoE+ ports, four Gigabit SFP slots, and a 240 Watts PoE budget. The switch is equipped with an IP30 rated metal enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate within a wide temperature range (- 40 – 75 °C (- 40 – 167°F)) for harsh environments. L2+ management include features such as PoE port control, 802.1Q / Q-in-Q VLAN, multicast, spanning tree, link aggregation, QoS, IPv4 / IPv6 static routing, ACLs, and 802.1X which allow for network integration flexibility.
Features
- 8 x Gigabit PoE+ ports
- 4 x SFP slots
- Supports 1000Base-FX fiber SFP modules
- 240W PoE power budget
- PoE alive check restarts unresponsive PoE powered devices
- 24Gbps switching capacity
- Hardened IP30 rated metal housing
- Includes DIN-rail mounting bracket
- Operating temperature range of -40° – 75° C (-40° – 167° F)
- Supports LACP, STP/RSTP, VLAN, and IGMP Snooping
- IEEE 802.1p QoS with queue scheduling support
- CLI (Console / Telnet / SSH), Web (HTTP / HTTPS), SNMP v1 / 2c / 3 management
- 802.1Q / Q-in-Q VLAN and IGMP Snooping / MLD / MVR support
- 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS support
- Bandwidth control per port
- Dual inputs provide redundant power with overload current protection
- Alarm output triggered by power failure
- Supports Ethernet Ring Protection Switching (ERPSv2)
- Power supply sold separately
| Specifications | |
| Standards | IEEE 802.1d |
| IEEE 802.1p | |
| IEEE 802.1Q | |
| IEEE 802.1s | |
| IEEE 802.1w | |
| IEEE 802.1X | |
| IEEE 802.1ab | |
| IEEE 802.1ax | |
| IEEE 802.3 | |
| IEEE 802.3u | |
| IEEE 802.3x | |
| IEEE 802.3z | |
| IEEE 802.3ab | |
| IEEE 802.3ad | |
| IEEE 802.3az | |
| IEEE 802.3af | |
| IEEE 802.3at | |
| Device Interface | 8 x Gigabit PoE+ ports |
| 4 x Gigabit SFP slots | |
| 1 x Console port (RJ-45) | |
| 1 x USB Port (firmware update, logs, configuration) | |
| 6-pin removable terminal block (primary/RPS power inputs & alarm relay output) | |
| DIP switches | |
| LED indicators | |
| Reboot button | |
| Data Transfer Rate | Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) | |
| Gigabit Ethernet: 2000Mbps (full duplex) | |
| SFP: 2000Mbps (full duplex) | |
| Performance | Switch fabric: 24Gbps |
| RAM buffer: 512MB | |
| MAC address table: 16K entries | |
| Jumbo frames: 10KB | |
| Forwarding mode: store and forwarda | |
| Forwarding rate: 17.9Mpps (64-byte packet size) | |
| Management | HTTP web-based GUI |
| CLI: Telnet / SSHv2 | |
| SNMP v1, v2c, v3 | |
| SNMP trap (up to 5 receivers) | |
| RMON groups 1/2/3/9 | |
| Device configuration backup & restore, upgrade firmware, reboot, and reset to default | |
| Multiple administrative or read-only user accounts | |
| Enable or disable power saving mode per port | |
| Static MAC entries | |
| LLDP (Link layer discovery protocol) | |
| Netlite device map | |
| ONVIF device discovery | |
| SNTP | |
| SMTP alert | |
| Syslog | |
| Port statistics/utilization | |
| Traffic monitor | |
| Port mirror: one to one, many to one | |
| Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps) | |
| Loopback detection | |
| DHCP relay/option 82 | |
| Xpress Ring | |
| ERPS (Ethernet Ring Protection Switching) G8032v2 | |
| SFP DDMI (Digital Diagnostic Monitoring Interface) | |
| MIB | MIB II RFC 1213 |
| Bridge MIB RFC 1493 | |
| RMON (Group 1,2,3,9) RFC 2819 RFC 1757 | |
| Spanning Tree | IEEE 802.1d STP (spanning tree protocol) |
| IEEE 802.1w RSTP (rapid spanning tree protocol) | |
| IEEE 802.1s MSTP (multiple spanning tree protocol) | |
| BPDU filter, guard, and root guard | |
| Link Aggregation | Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups) |
| Quality of Service (QoS) | 802.1p Class of service (CoS) |
| DSCP (Differentiated Services Code Point) | |
| Bandwidth control per port | |
| Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ) | |
| VLAN | 802.1Q tagged VLAN |
| MAC-based VLAN | |
| Port isolation | |
| Up to 256 VLAN groups, ID range 1-4094 | |
| Multicast | IGMP snooping v1, v2, v3 |
| IGMP querier | |
| IGMP fast leave | |
| Up to 256 multicast groups | |
| Static multicast entries | |
| Access Control | 802.1X authentication (Local user database, RADIUS, guest VLAN assignment) |
| DHCP snooping/screening | |
| Trusted host/IP access list for management access | |
| Port Security/MAC address learning restriction (Up to 100 entries per port) | |
| Static/dynamic ARP inspection | |
| ACL | Source/Destination MAC address |
| Source/Destination IP address | |
| Source Interface | |
| VLAN ID | |
| EtherType | |
| TCP/UDP port 1-65535 | |
| Layer 3 Features | IPv4 / IPv6 static routing |
| IPv4 / IPv6 proxy ARP | |
| IP interfaces: Up to 16 | |
| Routing table entries: Up to 500 (IPv4: 400 / IPv6: 100) | |
| DHCP Relay / Option 82 | |
| Special Features | Netlite device discovery and map display in GUI |
| Port security: MAC address learning restriction per port | |
| DHCP relay/option 82 & DHCP server snooping/screening support | |
| Wide operating temperature range | |
| Dual redundant power inputs | |
| Alarm relay triggered by power failure | |
| Surge and ESD protection | |
| Power | PWR (Primary) terminal input: 48 – 57V DC |
| RPS (Redundant) terminal input: 48 – 57V DC | |
| Compatible power supply: TI-S48048 (480W) sold separately | |
| Max. Consumption: 15W (no PoE load); 258W (full PoE load) | |
| PoE | PoE budget: 240W@48V DC input |
| 802.3at: Up to 30W per port | |
| PoE Mode A: Pins 1, 2, 3, and 6 for power | |
| PoE auto classification | |
| PoE port priority/power scheduling/PD alive check | |
| Over current/short circuit protection | |
| Terminal Block | Redundant power inputs, alarm relay contact, 6 pin |
| Wire range: 0.5 mm^2 to 2.5 mm^2 | |
| Solid wire (AWG): 12-26 | |
| Stranded wire (AWG): 12-26 | |
| Wire strip length: 10-11mm | |
| Alarm Relay Output | Relay output with current carrying capacity of 1A, 24V DC |
| Short circuit mode when one power source is connected | |
| Open circuit mode when two power sources are connected | |
| Enclosure | IP30 rated metal enclosure |
| Fanless passive cooling | |
| DIN-Rail mount | |
| Grounding point | |
| ESD (Ethernet) Protection: 8KV DC | |
| Surge (Power) Protection: 6KV DC | |
| MTBF | 562,234 499,126 hours @ 25° C |
| 142,948 104,194hours @ 75° C | |
| Operating Temperature | -40° – 75° C (-40° – 167° F) |
| Operating Humidity | Max. 95% non-condensing |
| Dimensions | 160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.) |
| Weight | 964g (2.12 lbs.) |
| Certifications | CE |
| FCC | |
| Shock (IEC 60068-2-27) | |
| Freefall (IEC 60068-2-32) | |
| Vibration (IEC 60068-2-6) | |