TI-PG62B
- 4 x Gigabit PoE+ ports
- 2 x Dedicated SFP slots
- 60 – 120 W power budget
- 12 Gbps switching capacity
- Hardened IP30 rated metal switch
- Includes DIN-rail and wall mounts
- Extreme -40 – 75 °C (-40 – 167 °F) operating temperature range
- Redundant 12-56 VDC power inputs with overload current protection
- Alarm output triggered by power failure
- Power supply sold separately
| Specifications | |
| Standards | IEEE 802.3 |
| IEEE 802.3u | |
| IEEE 802.3ab | |
| IEEE 802.3z | |
| IEEE 802.3x | |
| IEEE 802.3af | |
| IEEE 802.3at | |
| Device Interface | 4 x Gigabit PoE+ ports |
| 2 x 100/1000 Mbps SFP slots | |
| 6-pin removable terminal block | |
| LED indicators | |
| DIP switch | |
| DIN-Rail mount | |
| Wall mount | |
| Grounding point | |
| Data Transfer Rate | Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) |
| Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) | |
| Gigabit: 2000 #cfcfcfMbps (full duplex) | |
| Performance | Data RAM Buffer: 1024 KB |
| Switching Fabric: 12 Gbps | |
| MAC Address Table: 1 K entries | |
| Jumbo Frame: 9 KB | |
| Forwarding rate: 8.9 Mpps (64-byte packet size) | |
| Special Features | Hardened components rated for extreme temperatures |
| Supports 12/24/48 power inputs | |
| Voltage booster boost up to 55V DC | |
| Redundant power inputs | |
| Auto-Negotiation | |
| Auto store and forward architecture | |
| Automatic address learning and address aging | |
| ESD 6KV support | |
| DC Power | Input: 12/24/48 V DC |
| Output: up to 55 V DC | |
| Compatible power supply: TI-S12048 (sold separately) | |
| Consumption: Max. 5.76 Watts (no PoE) | |
| PoE | PoE budget: 120 W @ 24 VDC / 48 VDC / 56 VDC |
| PoE budget: 60 W @ 12 VDC | |
| Terminal Block | Redundant power inputs, alarm relay contact, 6 pin |
| Wire range: 0.34 mm^2 to 2.5 mm^2 | |
| Solid wire (AWG): 12-24/14-22 | |
| Stranded wire (AWG): 12-24/14-22 | |
| Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm | |
| Wire strip length: 7-8 mm | |
| DIP Switch | 1: OFF (port 5 SFP on, default), ON (port 5 SFP off) |
| 2: OFF (SFP 1000 M, default), ON (SFP 100 M) | |
| Alarm Relay Contact | Relay outputs with current carrying capacity of 1A, 24V DC |
| Open circuit mode when one power source is connected | |
| Short circuit mode when two power sources are connected | |
| MTBF | 510,304 hours |
| Housing | IP30 metal case |
| DIN-rail mount | |
| Wall mount | |
| Grounding point | |
| 6 KV ESD protection | |
| Operating Temperature | – 40 to 75 °C (-40 to 167 °F) |
| Operating Humidity | Max. 95 % non-condensing |
| Dimensions | 143 x 105 x 45 mm (5.6 x 4.1 x 1.8 in.) |
| Weight | 700 g (1.6 lb) |
| Certifications | CE |
| FCC | |
| Shock (EN 60068-2-27) | |
| Freefall (EN 60068-2-32) | |
| Vibration (EN 60068-2-6) | |