Trendnet TI-UPG62

Κωδικός προϊόντος: TI-UPG62

TRENDnet’s TI-UPG62 is a reliable IP30 unmanaged DIN-rail Ultra PoE switch with a rugged housing rated for extreme industrial environments. It offers 4 Gigabit Ultra PoE ports, 240 W PoE power budget, two dedicated SFP slots, and a 12 Gbps switching capacity. Dual redundant power inputs and a power failure alarm relay.




  • 6-Port Hardened Industrial Gigabit Ultra PoE DIN-Rail Switch
  • TI-UPG62 (Version v1.0R)
  • 4 x Gigabit Ultra PoE ports
  • 2 x dedicated SFP slots240 watt power budget
  • 12 Gbps switching capacity
  • Hardened IP30 rated metal switch
  • Includes DIN-rail and wall mounts
  • Extreme -40 to 75 ºC (-40 to 167 ºF) operating temperature range
  • Dual redundant power inputs with overload current protection
  • Alarm output triggered by power failure
  • Power supply sold separately (TI-S24048)
Standards        IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
IEEE 802.3bt
Device Interface        4 x Gigabit PoE++ ports
1 x Gigabit share port
2 x Gigabit SFP slots
6-pin removable terminal block
LED indicators
DIN-Rail mount
Wall mount
Grounding point
Data Transfer Rate    Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit: 2000Mbps (full duplex)
Fiber: 2000Mbps (full duplex)
Performance     Data RAM Buffer: 1MB
Switching Fabric: 12Gbps
MAC Address Table: 1K entries
Jumbo Frame: 9KB
Forwarding rate: 8.9Mpps (64-byte packet size)
Special Features      Hardened components rated for extreme temperatures
Multiple power inputs
Auto store and forward architecture
Automatic address learning and address aging
ESD 8KV protection
DC Power   Input: 52 – 56V DC
Compatible power supply: TI-S24048 (sold separately)
Max. consumption: 6.2W (no PD)
PoE    PoE: up to 15.4W per port
PoE+: up to 30W per port
PoE++: up to 90W per port
Power budget: 240W
Terminal Block      Redundant power inputs, alarm relay contact, 6 pin
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque: 5 lb. – In / 0.5Nm / 0.56 Nm
Wire strip length: 7-8mm
DIP Switch  1: OFF (port 5 SFP on, default), ON (port 5 SFP off)
2: OFF (SFP 1000M, default), ON (SFP 100M)
Alarm Relay Contact   Relay outputs with current carrying capacity of 1A, 24V DC
Short circuit mode when two power sources are connected
Open circuit mode when only one power source is connected
MTBF 510,304 hours
Housing       IP30 metal case
DIN-Rail mount
Wall mount
Grounding point
8KV ESD protection
Operating Temperature
– 40° – 75° C (-40 – 167° F)
Operating Humidity Max. 95% non-condensing
Dimensions 143 x 105 x 36mm (5.6 x 4.1 x 1.4 in.)
Weight 514g (1.1 lb)
Certifications         CE
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)
IEC 61000-4-2
IEC 61000-4-4
IEC 61000-4-5