Description
TRENDnet’s 48-Port Gigabit PoE+ Managed Layer 2 Switch with 4 shared SFP slots, model TL2-PG484, has 24 x Gigabit PoE+ ports, 24 x Gigabit ports, and 4 x shared SFP slots, a console port, a PoE Power budget of 370 Watts, and an advanced Layer 2 management feature set.
This IPv6 ready switch offers traffic management, troubleshooting, access control, and monitoring features.
Specifications | |
Standards | IEEE 802.1d |
IEEE 802.1p | |
IEEE 802.1Q | |
IEEE 802.1s | |
IEEE 802.1w | |
IEEE 802.1X | |
IEEE 802.1ab | |
IEEE 802.3 | |
IEEE 802.3u | |
IEEE 802.3x | |
IEEE 802.3z | |
IEEE 802.3ab | |
IEEE 802.3ad | |
IEEE 802.3af (15.4 Watts / port) | |
IEEE 802.3at (30 Watts / port) | |
IEEE 802.3az | |
Device Interface | 24 x Gigabit PoE+ ports |
24 x Gigabit ports | |
4 x shared Gigabit SFP slots | |
1 x RJ-45 console port | |
LED indicators | |
Reset button | |
Data Transfer Rate | Ethernet: 10 Mbps (half duplex), 20 Mbps (full duplex) |
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps (full duplex) | |
Gigabit Ethernet: 2000 Mbps (full duplex) | |
Performance | Switch fabric: 96 Gbps |
RAM buffer: 1 MB | |
MAC Address Table: 16K entries | |
Jumbo Frames: 10 KB | |
HOL Blocking Prevention | |
Forwarding rate: 71.4 Mpps (64-byte packet size) | |
Management | CLI (Console / Telnet / SSHv2) |
HTTP / HTTPS (SSL v2 / 3 TLS) Web based GUI | |
SNMP v1, v2c, v3 | |
RMON v1 | |
Static Unicast MAC Address | |
Enable / disable 802.3az Power Saving | |
LLDP | |
Virtual Cable Test | |
IPv6: IPv6 Neighbor Discovery, IPv6 Static IP, DHCPv6, Auto configuration | |
MIB | MIB II RFC 1213 |
Bridge MIB RFC 1493 | |
Bridge MIB Extension RFC 2674 | |
SNMPv2 MIB RFC 1907 | |
Ethernet Interface MIB RFC 1643 | |
Ethernet –like MIB RFC 2863 | |
Interface Group MIB RFC 2233 | |
MIB Traps Convention RFC 1215 | |
RMON MIB RFC 1757, RFC 2819 | |
802.1p MIB RFC 2674 | |
RADIUS Client Authentication MIB RFC 2618 | |
LLDP-MIB IEEE 802.1ab | |
Ping MIB RFC 2925, RFC 4560 | |
Spanning Tree | IEEE 802.1D STP (Spanning Tree protocol) |
IEEE 802.1w RSTP (Rapid Spanning Tree protocol) | |
IEEE 802.1s MSTP (Multiple Spanning Tree protocol) | |
Link Aggregation | Static Link Aggregation |
802.3ad Dynamic LACP | |
Quality of Service (QoS) | 802.1p Class of Service (CoS) |
DSCP (Differentiated Services Code Point) | |
Bandwidth Control per port | |
Queue Scheduling: Strict Priority, Weighted Round Robin (WRR) | |
VLAN | Multiple management VLAN assignment |
Asymmetric VLAN | |
802.1Q Tagged VLAN | |
Dynamic GVRP | |
Up to 256 VLAN groups, ID Range 1-4094 | |
Private VLAN (Protected Ports) | |
Voice VLAN (10 user defined OUIs) | |
Multicast | IGMP Snooping v1, v2, v3 |
Static Multicast Address | |
Up to 256 multicast entries | |
MLD Snooping v1, v2 | |
Port Mirror | RX, TX, or Both |
One to one | |
Many to one | |
Access Control | 802.1X Port-Based Network Access Control, RADIUS, TACACS+ |
Local Dial In User Authentication | |
DHCP Snooping | |
Loopback Detection | |
Duplicated Address Detection | |
Trusted Host | |
Denial of Service (DoS) | |
ACL IPv4 L2-L4 & IPv6 | MAC Address |
VLAN ID | |
Ether Type (IPv4 only) | |
IP Protocol 0-255 | |
TCP / UDP Port 1-65535 | |
802.1p | |
DSCP (IPv4 only) | |
IPv6 Address (IPv6 only) | |
Management Utility | Windows® 10, 8.1, 8, 7, Vista, XP, Windows® 2003 / 2008 Server |
Special Features | PoE+ ports |
Power | Input: 100 – 240 V AC, 50/60 Hz, internal power supply |
Consumption: 425.6 W (max.) | |
PoE | PoE budget: 370 W |
802.3at: Up to 30 W per port (ports 1-24) | |
Mode A: Pins 1,2 for power(+) and pins 3,6 for power(-) | |
PD auto classification | |
Over current / short circuit protection | |
Smart Fan / Acoustics | Quantity: 4 |
Noise Level: 56 dB(A) (max.) | |
MTBF | 318,350 hours |
Operating Temperature | 0 – 45°C (32 – 113°F) |
Operating Humidity | Max. 90% non-condensing |
Dimensions | 440 x 430 x 44.45 mm (17.3 x 16.93 x 1.75 in.) |
Rack mountable 1U height | |
Weight | 6.61 kg (14.57 lbs.) |
Certifications | CE |
FCC | |
UL |