Characteristics
- 4 x Gigabit PoE++ ports
- 4 x Gigabit PoE+ ports
- 2 x Gigabit Share ports (SFP or RJ-45)
- 360W power budget
- 20Gbps switching capacity
- Hardened IP30 rated metal switch
- Includes DIN-Rail and wall mounts
- Extreme operating temperature range of -40° – 75° C (-40° – 167° F)
- Dual power inputs for redundancy
- Alarm output triggered by power failure
- Power supply sold separately (TI-S48048)
| Specifications | |
| Standards | IEEE 802.3 |
| IEEE 802.3u | |
| IEEE 802.3ab | |
| IEEE 802.3z | |
| IEEE 802.3x | |
| IEEE 802.3af | |
| IEEE 802.3at | |
| IEEE 802.3bt | |
| Device Interface | 4 x Gigabit PoE++ ports |
| 4 x Gigabit PoE+ ports | |
| 2 x Gigabit share port | |
| 2 x Gigabit share SFP slots | |
| 6-pin removable terminal block | |
| LED indicators | |
| DIN-Rail mount | |
| Wall mount | |
| Grounding point | |
| Data Transfer Rate | Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) | |
| Gigabit: 2000Mbps (full duplex) | |
| Fiber: 2000Mbps (full duplex) | |
| Performance | Data RAM Buffer: 2MB |
| Switching Fabric: 20Gbps | |
| MAC Address Table: 11K entries | |
| Jumbo Frame: 10KB | |
| Forwarding rate: 8.9Mpps (64-byte packet size) | |
| Special Features | Hardened components rated for extreme temperatures |
| Multiple power inputs | |
| Auto-Negotiation | |
| Auto store and forward architecture | |
| Automatic address learning and address aging | |
| ESD 8KV protection | |
| DC Power | Input: 48 – 56V DC |
| Compatible power supply: TI-S24048, TI-S48048 (sold separately) | |
| Max. consumption: 6.2W (no PD) | |
| AC Power | Input 100 – 240V AC, 50/60Hz, 2A |
| Compatible power adapter: 48VDC3000 (sold separately) | |
| Output: 48C DC, 3.34A 160W max. | |
| PoE | PoE: up to 15.4W per port |
| PoE+: up to 30W per port | |
| PoE++: up to 90W per port | |
| Power budget: 360W | |
| Terminal Block | Redundant power inputs, alarm relay contact, 6 pin |
| Wire range: 0.34mm^2 to 2.5mm^2 | |
| Solid wire (AWG): 12-24/14-22 | |
| Stranded wire (AWG): 12-24/14-22 | |
| Torque: 5 lb. – In / 0.5Nm / 0.56 Nm | |
| Wire strip length: 7-8mm | |
| DIP Switch | 5: bt (sets port 5 in PoE++ mode), POH (sets port 5 in POH mode) |
| 6: bt (sets port 6 in PoE++ mode), POH (sets port 6 in POH mode) | |
| 7: bt (sets port 7 in PoE++ mode), POH (sets port 7 in POH mode) | |
| 8: bt (sets port 8 in PoE++ mode), POH (sets port 8 in POH mode) | |
| Alarm Relay Contact | Relay outputs with current carrying capacity of 1A, 24V DC |
| Short circuit mode when two power sources are connected | |
| Open circuit mode when only one power source is connected | |
| MTBF | 510,304 hours |
| Housing | IP30 metal case |
| DIN-Rail mount | |
| Wall mount | |
| Grounding point | |
| 8KV ESD protection | |
| Operating Temperature | – 40° – 75° C (-40 – 167° F) |
| Operating Humidity | Max. 95% non-condensing |
| Dimensions | 156 x 122 x 48mm (6.1 x 4.8 x 1.9 in.) |
| Weight | 630g (1.38 lb) |
| Certifications | CE |
| FCC | |
| UL | |
| Shock (IEC 60068-2-27) | |
| Freefall (IEC 60068-2-32) | |
| Vibration (IEC 60068-2-6) | |
| IEC 61000-4-2 | |
| IEC 61000-4-4 | |
| IEC 61000-4-5 | |